Call Now: 1-800-862-0654

 

 

 

 

 

 

 

Amped aims at developing high quality routers providing long range coverage. Keeping in mind the networking needs of customer and advance technology, amped routers are routers are designed with customer and business oriented mind. Amped wireless devices make you free from the hassles of cable by providing wireless routers, extenders and USB adapters for home and office use. Amped wireless routers are enabled with high power amplifiers providing extended wireless signals for broader coverage. They can be setup, accessed and configured using the web address setup.ampedwireless.com.

High power antennas, in amped routers, with Omni-directional coverage provide unmatched Wi-Fi signal coverage all around your home or offices. The inbuilt advanced Wi-Fi technology gives blazing speed letting you stream your videos and online gaming without any lag and buffering. Mostly, amped wireless routers have MU-MIMO technology which helps you stay connected to multiple devices at the same time.

Amped wireless Smart Security Features

Amped wireless routers are enabled with high end security features, one of them being the parental control which gives the access to parents to monitor and control viewing of unauthorized websites. Smart security feature also allow you to control and limit usage of Wi-Fi, restrict user access and firewall and create guest network access etc. All the amped wireless routers support the WPA /WPA 2 and WPS amped wireless setup.

Amped wireless router setup

All Amped wireless routers are very easy to install and configure their settings following the Smart wizard setup process. To perform the setup process, you just have to plug your modem into your amped router and once your modem is connected then you will have to connect your computer with Amped wireless router.  Thereafter, you will be easily able to access the Amped wireless setup wizard. After doing your amped wireless setup configuration, you can use your amped router to access its features and enjoy high range wireless network connectivity. You can follow the steps mentioned below for amped wireless setup:

  • Make the connections in between your Amped wireless router and your modem taking an Ethernet cable and connecting it to your modem by one of its end and to the WAN port of your Amped wireless router at the second end.
  • Plug off after turning off your modem along with router by unplugging the power cable from power source for about 10 seconds.
  • Plug both of them to power again and turn on the modem first and wait for about a minute and then go ahead to turn on Amped Wireless router.
  • Also, make connection between your amped wireless router and your computing device with the help of an Ethernet cable.
  • Launch a supporting web browser from your computing device and type http://setup.ampedwireless.com as the web address in address bar of your browser
  • This is followed by display of login screen where you will have to enter your login credentials which is “admin” for both username and password for almost all the amped wireless routers.
  • The Smart Setup Wizard appears and it automatically starts the setup process after clicking the Begin Setup option. You will have to follow the onscreen instructions directed by The Setup Wizard.
  •  Allow the automatic configuration of your Amped wireless router by clicking on the Automatic Configuration option.
  • Click on the Next button.
  • Enter a new SSID or Network Name for your Amped wireless router when asked.

The Amped Wireless router is now setup can be personalized further.

Amped Wireless WPS connection – Amped wireless setup through WPS

Connection through Wi-Fi device is only possible in case your device has WPS one-touch setup by following these steps:

  • Find the WPS button that is located on the back panel of your Amped wireless router and press and hold it for about 2-3 seconds.
  • The power LED of the amped wireless router begins to blink.
  • When the LED starts blinking, push the WPS button that is on your wireless adapter or enable WPS using the given software for your wireless adapter.
  • Following this, WPS will configure and establish the connection settings for your wireless adapter automatically to connect to your Amped wireless Router.

Amped Wireless router login through http://setup.ampedwireless.com

The Amped Wireless router web interface is the control panel for your amped router where all the router settings are stored and can be changed from as well. For making changes to your network you’ll have to login to your Amped Wireless router

  • Launch a supporting web browser from your computing device and type http://setup.ampedwireless.com as the web address in address bar of your browser
  • Or you can also try to login with IP address http://192.168.1.240
  • An amped wireless web login page appears
  • Enter the default login credentials for your amped wireless router.
  • The default username and password is ‘admin’ and has to be typed for username and password.

In case any of the following has to be changed, you will have to access the amped wireless router web interface;

  • Default network name
  • WiFi network name and password
  • Login Username and Password
  • DHCP client addresses
  • Firewall settings

Access the Amped Wireless web interface

It is quite easy and straightforward to access the web interface and you just need to follow the instructions below:

  • Access to your network by either connecting through LAN-cable or through Wi-Fi
  • Log into the router’s web interface by launching a supporting web browser from your computing device and type http://setup.ampedwireless.com as the web address in address bar of your browser
  • Or you can also try to login with IP address http://192.168.1.240
  • An amped wireless web login page appears
  • Enter the default login credentials for your amped wireless router when the amped wireless web-interface will open.
  • The default username and password is ‘admin’ and has to be typed for username and password.

Note: Ensure that you must be connected to your Amped Wireless router either using an Ethernet cable or over your Wi-Fi connection. In case you are not connected to your wireless network, it will be impossible to reach the web interface.

Amped Wireless router configuration

  • Log into the router’s web interface by launching a supporting web browser from your computing device and type http://setup.ampedwireless.com as the web address in address bar of your browser
  • Or you can also try to login with IP address http://192.168.1.240
  • An amped wireless web login page appears
  • Enter the default login credentials for your amped wireless router when the amped wireless web-interface will open.
  • Logging in to the Amped Wireless router’s admin interface allows you to change any available settings.
  • Be careful to configure your amped wireless router so that you don’t break your wireless network.
  • It is recommended to write down your current settings before you try to change them so that you can revert to them in any case of trouble.

 What if in case the Amped Wireless router or its network stops working after the configuration change?

If in any case you make some change, by fault, that breaks your Amped Wireless home network, you can always go back to start by just following the generic 30 30 30 hard reset setting of your amped wireless router.

30 30 30 hard reset or Reset via reset button is quite easy and quick method which can be done following the steps below:

  • Locate the reset button that is located on the back panel of the router.
  • Press and keep holding the reset button using a pin or a sharp object for about ten seconds and then release the reset button.
  • Wait for some time till the LED light starts flashing giving an indication that your Amped wireless router has been restored back to its factory default settings.

Following the reset process is usually the last effort, and if it is still possible to have access to the Amped Wireless interface you can obviously try to login and revert the settings first.

Amped Wireless Default Password, Login and IP address

The amped wireless routers have a default username of admin and a default password of admin as well and the default IP address is either http://192.168.1.240 or 192.168.3.1.

These Amped Wireless default login credentials are needed whenever you want to login to the web interface of your router’s web interface to change any required settings.

Setup.ampedwireless.com

www.setup.ampedwireless.com is a local web address that the amped wireless users use to access and to configure their amped wireless networking devices like routers, extenders, modems, and USB adapters.  It allows direct login to the web interface of amped wireless. Login through setup.ampedwireless.com also requires log in credentials such as username and password to be entered into the login screen.

What in case you forgot your Amped Wireless router password?

If in case you forget your amped wireless router password, need not worry as all the Amped Wireless routers come with a factory default preset password so that you can revert to router’s settings by following the instructions below.

Steps for  Resetting Amped Wireless router

  • Locate the reset button that is located on the back panel of the router.
  • Press and keep holding the reset button using a pin or a sharp object for about ten seconds and then release the reset button.
  • Wait for some time till the LED light starts flashing giving an indication that your Amped wireless router has been restored back to its factory default settings.

Your Amped Wireless router should have been reset now to its new factory settings

You can also reset the router via web interface which requires login to the web-based interface of amped wireless router

  • Open www.setup.ampedwireless.comthrough a web browser.
  • Enter your default login details in order to access the web admin page of the amped wireless.
  • Go to the settings page and click on the factory reset tab to restore the router to factory settings.

Note: do not forget to change the default username and password of your router in order to increase the security of your router after doing the factory reset.

How can you boost Amped-Wireless Wi-Fi and overcome any connectivity issues?

  1. Place your Amped-Wireless router at a perfect location so that you avail the best signal and network connection. Ensure to keep your Amped-Wireless router at a visible spot and make sure to not keep it facing wall or behind the curtains.
  2. Try finding a Good Wireless Channel Instead of setting an Auto on your Amped-Wireless router a s the auto channels tend to fail. Instead find a seamless wireless channel of what the router finds automatically to ensure that your signal does not interfere with internet signal of your neighbors.

You can open command prompt to see the list of all wireless networks and the channels that being used in your vicinity. Try picking the channel with the lowest interference instead of using “Auto” for the control channel.

  1. Try to check the frequency of Amped-Wireless router if it has dual-band. 2.4 GHz is the more commonly used band but switching to 5GHz gives better results.
  2. Try to connect gaming consoles or media streamers into your Amped-Wireless using Ethernet wire cables instead of wifi. As these gaming devices flood the network with data which means you should connect the devices through hardwire (using Ethernet cable) as they tend to consume a lot of bandwidth. It can eventually help the overall network speed of Amped-Wireless router by connecting through hardwire.
  3. Ensure to reboot Amped-Wireless router on regular basis as the routers are built to be running constantly at all times, regular power cycling helps with solving most of the issues. Rebooting your Amped-Wireless router on regular basis can fix your Internet connection problems, even improve slow moving connections and resolve any kind of wireless issues altogether. Try to unplug your Amped-Wireless router or reboot modem on a quarterly basis to avoid any connectivity issues.
error: Content is protected !!